RAVENOL Sperrdiff.-Getr.-Oel LS 90

Mahsulot kodi: 1223302
Yog‘ turi:
Talablarga mos:
ZF TE-ML 05C
ZF TE-ML 12C
ZF TE-ML 16E
ZF TE-ML 21C
Texnik spetsifikatsiyalarga mos:
MIL-L-2105 D
API:

RAVENOL Sperrdiff.-Getr.-Oel LS 90

Mahsulot kodi: 1223302

Mahsulot mavjudligi haqida ma’lumot olinmoqda...

Narx:
-
Omborda yo‘q
Tanlangan tavsiflar bilan mahsulotga buyurtma berish mumkin emas
Mahsulotga buyurtma berish mumkin emas
Kelish haqida xabar berish
Mahsulot kelishi haqida menga xabar bering
So'rovingiz qabul qilindi.

Mahsulot mavjud bo'lganda sizga xabar beramiz.
Your E-Mail
Validity time
- required to fill
Checking...
Qisqa ishlab chiqaruvchi kodi: 1223302-700
To‘liq ishlab chiqaruvchi kodi: -
Shtrix-kod: -
Eskirgan shtrix-kodlar:
Eskirgan artikullar:
Yog‘ turi:
Talablarga mos:
ZF TE-ML 05C
ZF TE-ML 12C
ZF TE-ML 16E
ZF TE-ML 21C
Texnik spetsifikatsiyalarga mos:
MIL-L-2105 D
API:

RAVENOL Sperrdiff.-Getr.-Oel LS 90 is locking differential hypoid gear oil that meets the extremely stringent requirements in differential gears and differential lock.

RAVENOL Sperrdiff.-Getr.-Oel LS 90 ensures good adhesion, high pressure-resistant lubricating film and offers excellent "limited slip" (LS) properties against unwanted slip-slip properties. Greatly offset hypoid gear pairs are also under severe operating conditions effectively protected against wear.

Application Note

RAVENOL Sperrdiff.-Getr.-Oel LS 90 GL-5 was specially developed for use in differential with high requirements on differential with differential lock.

Characteristics

  • Extremely high load carrying capacity
  • Excellent wear protection by EP agents
  • Excellent "limited slip" – Features
  • Excellent resistance to aging
  • High oxidation resistance even under high thermal stress
  • Good foam / air separation and behave well at high speeds
  • Neutrality towards non-ferrous metals and seals
  • Excellent viscosity-temperature behavior
Ko‘proq ko‘rsatish Kamroq ko‘rsatish

Texnik xususiyatlar

Parametr Qiymat Audit
Brand RAVENOL  
Viskozite 90  
Zichlik 20°С da, g/cm³ 889 EN ISO 12185
Rang tan տեսողական
Viskozite 100°С da, mm²/s 17.6 DIN 51562-1
Viskozite 40°С da, mm²/s 177.3 DIN 51562-1
Viskozite indeksi VI 108 DIN ISO 2909
Brookfield usuli bo‘yicha viskozite -12°C da, mPa*s 12.400 ASTM D2983
Qotish harorati, °C -30 DIN ISO 3016
Yong‘in chiqish harorati, °C 214 DIN EN ISO 2592
Misga nisbatan korroziya testi, 121°С / 3 soat 1b ASTM D130